- Product Description Allied Telesis AT X950-28XSQ - switch - 24 ports - managed - rack-mountable
- Device Type Switch - 24 ports - L3 - managed - stackable
- Enclosure Type Rack-mountable 1U
- Bundled Services 5 years Net Cover support
- Subtype 10 Gigabit Ethernet
- Ports 24 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 40/100 Gigabit QSFP+ / QSFP28
- Performance Switching fabric speed: 1.92 Tbps ¦ Forwarding rate: 1190 Mpps
- Capacity Priority queues per port: 8 ¦ VLANs supported: 4096
- MAC Address Table Size 96K entries
- Jumbo Frame Support 10KB
- Routing Protocol OSPF, BGP-4, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, IGMPv3, OSPF for IPv6, OSPFv3, RIPng, MLDv2, MLD, VRRPv3, CIDR, MSTP, RSTP
- Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, CLI, SLP, SCP, SSH 6, SFTP, NTP
- Features DHCP support, BOOTP support, ARP support, Syslog support, DoS attack prevention, port mirroring, DiffServ support, IPv6 support, sFlow, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Virtual Route Forwarding-Lite (VRF-Lite), Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Equal-Cost Multipath (ECMP), STP Root Guard, Uni-Directional Link Detection (UDLD), LLDP support, DNS relay, Energy Efficient Ethernet, Management Information Base (MIB), Network Access Control (NAC), 802.1x authentication, VoIP support, Ethernet Ring Protection Switching (ERPS), OpenFlow support, Ethernet Protection Switched Ring (EPSRing), Virtual Chassis Stacking (VCStack), Bridge protocol data unit (BPDU), Logical Link Control, Internet Control Message Protocol (ICMP), black hole routing, Control Plane Prioritization (CPP), Allied Telesis Management Framework (AMF), Built-In Self Test (BIST), Cable fault locator (TDR), Management Information Base (MIB) II, Digital Diagnostics Monitoring (DDM), policy based routing, Authentication, Authorization and Accounting (AAA), Connectivity Fault Management (CFM), LLDP-MED, storm protection, User Datagram Protocol (UDP), loopback detection
- Compliant Standards IEEE 802.2, IEEE 802.3, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, X.509, IEEE 802.1ad, IEEE 802.1v, ANSI/TIA-1057, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3az, IEEE 802.3ba, IEEE 802.1AX, ITU-T G.8032, IEEE 802.3bj, IEEE 802.3bz
- Power Redundancy Optional
- Dimensions (WxDxH) 17.3 in x 19 in x 1.7 in
- Weight 15.9 lbs
|
