« Back
Cisco 881 Eth Sec Router with 802.11n FCC Compliant - C881W-A-K9/Power
Cisco 881 Eth Sec Router with 802.11n FCC Compliant - C881W-A-K9/Power
- Price:
$1,086.99
- Availability:
- Mfr #: C881W-A-K9
- UNSPSC #: 43222609
- Item #: 03567792
- Add to Shopping List
Need Help?
Contact Zones Online support at 800.408.9663
Dimensions & Weight
Width | 12.8 in |
Depth | 10.4 in |
Height | 1.7 in |
Weight | 5.51 lbs |
Environmental Parameters
Min Operating Temperature | 32 °F |
Max Operating Temperature | 104 °F |
Humidity Range Operating | 10 - 85% (non-condensing) |
General
Device Type | Wireless router - 4-port switch (integrated) |
Enclosure Type | Desktop |
Connectivity Technology | Wireless, wired |
Data Link Protocol | Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
Frequency Band | 2.4 GHz |
Capacity | IPSec VPN tunnels: 20 |
Network / Transport Protocol | L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS |
Routing Protocol | OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE, policy-based routing (PBR), WCCP |
Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS, SSH |
Encryption Algorithm | LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
Authentication Method | RADIUS, TACACS+ |
Features | NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD) |
Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.1ag, IEEE 802.11n (draft 2.0), CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386 |
RAM | 512 MB (installed) / 1024 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin |
Flash Memory | 128 MB |
Status Indicators | Port status, power |
Expansion / Connectivity
Interfaces | LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ USB: 1 x 4 pin USB Type A |
Expansion Slots | 1 (total) / 1 (free) x SO-DIMM 200-pin |
Power
Power Device | External power adapter - 60 Watt |
Voltage Required | AC 120/230 V (50/60 Hz) |
Antenna
Antenna | External detachable |
Antenna Qty | 3 |
Directivity | Omni-directional |
Gain Level | 2 dBi |
Software / System Requirements
OS Provided | Cisco IOS Advanced Security |