« Back
CISCO C9350 48-PORT 10G-MGIG WITH 90W UPOE+
CISCO C9350 48-PORT 10G-MGIG WITH 90W UPOE+
- Price:
$13,506.99
- Availability:
- Mfr #: C9350-48HX
- UNSPSC #: 43222612
- Item #: 301817580
- Add to Shopping List
Need Help?
Contact Zones Online support at 800.408.9663
Miscellaneous
| MTBF | 277,660 hours |
| Compliant Standards | 47 CFR Part 15 Class A, AS/NZS 60950-1:2011, CAN/CSA-C22.2 No. 60950-1-07, CAN/CSA-C22.2 No. 62368-1-14, CISPR 24:2010+A1:2015, CISPR 32 Second Edition Class A, CNS13438:2006, EN 300 386, EN 300 386 V1.6.1, EN 55024:2010+A1:2015, EN 55032:2012, EN 61000-3-2:2014, EN 61000-3-3:2013, EN55024:2010:A1, GB 4943-95, ICES-003 issue 6:2016, IEC 60950-1, IEC 60950-1:2006, KN32:2015 Class A, KN35:2015, NOM-019-SCFI-1998, TCVN 7189: 2009 Class A, TCVN 7317:2003, UL 60950-1 Second Edition, UL 62368-1 Second Edition |
Dimensions & Weight
| Width | 17.5 in |
| Depth | 18.6 in |
| Height | 1.7 in |
Manufacturer Warranty
| Service & Support | Limited warranty - advance parts replacement - lifetime - response time: next business day |
Environmental Parameters
| Min Operating Temperature | 23 °F |
| Max Operating Temperature | 113 °F |
| Humidity Range Operating | 10 - 95% RH (non-condensing) |
| Min Storage Temperature | -40 °F |
| Max Storage Temperature | 167 °F |
| Humidity Range Storage | 10 - 95% RH (non-condensing) |
General
| Device Type | Switch - 48 ports - L3 - managed - stackable |
| Enclosure Type | Desktop, rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 48 x 10/100/1000/2.5G/5G/10GBase-T (UPoE+) |
| Power Over Ethernet (PoE) | UPOE+ |
| PoE Budget | 4320 W |
| Performance | Switching capacity: 1760 Gbps ¦ Stacking bandwidth: 3360 Gbps ¦ Forwarding rate: 1309.44 Mpps ¦ Forwarding rate with stacking: 2499.84 Mpps |
| Capacity | VLAN IDs: 4094 ¦ PVST instances: up to 10000 ¦ STP Virtual Ports for PVST: 16000 ¦ STP Virtual Ports for MST: 100000 ¦ Switched virtual interfaces (SVIs): 2000 ¦ MAC addresses: 64000 ¦ IPv4 routes: 192000 ¦ IPv6 routes: 96000 ¦ ARP entries: 64000 ¦ IPv6 neighbor discovery: 4000 ¦ IGMP snooping groups: 8000 ¦ MLD groups: 4000 ¦ IPv4 routes (Multicast): 8000 ¦ IPv6 routes (Multicast): 4000 ¦ IPv4 QoS ACL scale: 2000 ¦ IPv6 QoS ACL scale: 2000 ¦ IPv4 security ACL scale: 5000 ¦ IPv6 security ACL scale: 25000 ¦ NetFlow entries: 64000 ¦ Packet buffer size: 36 |
| MAC Address Table Size | 128K entries |
| Jumbo Frame Support | 9126 bytes |
| Routing Protocol | BGP-4, BGP-6, IS-ISv4, RIP-2, RIPng, EIGRP, EIGRP for IPv6, PIM-SM, OSPFv3 |
| Remote Management Protocol | SSH, CLI, NETCONF, RESTCONF, YANG |
| Authentication Method | Secure Shell (SSH) |
| Features | Cisco StackPower technology, Cisco StackWise Technology, ARP support, VLAN support, IGMP support, Bandwidth Shaping, BGP-4, Cisco Trust Anchor module, EIGRP Stub Routing, FHS, GIR mode, HQoS, High Availability, image signing, IS-IS, IP-routing, LACP support, MQC, MLD, OSPF, PIM-SM snooping, PIM-SSM snooping, PAgP support, PIM, PVLAN support, QinQ VLAN, QoS, RSTP, secure boot, SMU, SSO, STP support, SPQ, traffic metering, VOQ, VLAN mapping, FNF, IPFIX, out-of-band management, RFID authentication, ZTP |
| Compliant Standards | IEEE 802.3, IEEE 802.1Q, IEEE 802.3ad (LACP), IEEE 802.1x |
| RAM | 16 GB |
| Flash Memory | 18 GB |
| Status Indicators | System, port transmission speed, status, PoE |
Expansion / Connectivity
| Interfaces | 48 x 1000Base-T RJ-45 UPOE+ - 90 W ¦ 1 x USB Type C console ¦ 1 x USB Type C host ¦ 1 x 10/100/1000Base-T RJ-45 management ¦ 1 x console RJ-45 ¦ 2 x network stack device ¦ 1 x USB 3.0 |
| Expansion Slots | 1 (total) / 1 (free) x Stacking Module slot |
Power
| Power Device | Internal power supply |
| Installed Qty | 1 |
| Max Supported Qty | 3 |
| Power Redundancy | Optional |
| Power Redundancy Scheme | N+1 (with optional power supply) |
Software / System Requirements
| OS Required | Cisco IOS XE 17.18.1 or later |