Device Type

• 1 slot interconnect card assembly, 000/010 (1)
• ADF ?at cable (1)
• ADF cable (1)
• ADF feed roller (1)
• ADF flatbed cushion (1)
• ADF pad (1)
• ADF pick roller (1)
• ADF pick roller assembly (1)
• ADF separator pad (1)
• ADF separator roll (3)
• ADF separator roller (1)
• Autocompensator mechanism assembly (1)
• Bezel (2)
• Bezel, MS315dn (1)
• Bin full sensor (2)
• Cartridge smart chip contact (1)
• Column outer cover (1)
• Control panel flat cable (4)
• Cooling fan (1)
• Cover (1)
• Deflector duplex exit (1)
• Developer carrier (1)
• Duplex cooling fan two wire (1)
• Exit output cover (1)
• Fan (1)
• Fan cover (1)
• Feed and transport primary gear (1)
• Feed and transport secondary gear (1)
• Feed one-way bearing and gear kit (1)
• Feed roller (1)
• Flat cable, 2.4-inch display (1)
• Front cover hinges (1)
• Front door (1)
• Front door parts packet (1)
• Fuser access door (1)
• Fuser fan duct (1)
• High voltage power supply/sensor cable assembly (1)
• Inner guide de?ector (1)
• Input sensor (2)
• Internal network adapter cable (1)
• K developer carrier (1)
• Left control panel arm (1)
• Left cover (1)
• Left frame extension (1)
• Left operator panel hinge (1)
• Lower control panel bezel (1)
• M developer carrier (1)
• Media pinch pad assembly (1)
• Media present sensor flag (1)
• Media turn guide with actuator (1)
• Mirror retaining clip (1)
• Multipurpose feeder feeder lift plate with cable (1)
• Multipurpose feeder paper pick assembly (1)
• Multipurpose feeder pick arm assembly (1)
• Multipurpose feeder pick roller and separator pad (1)
• Multipurpose feeder roller flange (1)
• Narrow media / bin full sensor (1)
• Operator panel front cover (1)
• Operator panel left bezel (1)
• Output bin (1)
• Output bin paper bail (1)
• Output bin tray (2)
• Output cover assembly (1)
• Packet grease (1)
• Paper bail (1)
• Parts packet (1)
• Pick arm spring (1)
• Pick roll pad (1)
• Pick roller (3)
• Pick solenoid assembly (1)
• Printhead access cover (1)
• Rear lower cover (1)
• Redrive motor (1)
• Restraint pad (1)
• Right control panel arm (1)
• Right frame pivot (1)
• Right operator panel hinge with cable (1)
• Scanner rear right cover (1)
• Sensor (5)
• Sensor (550-sheet tray pass-through) (1)
• Sensor (550-sheet tray trailing edge) (1)
• Sensor (bin full / waste toner bottle present) (1)
• Sensor (duplex path 1, 2) (1)
• Sensor (MPF paper present) (1)
• Sensor (pass-through) (1)
• Sensor (tray present) (1)
• Sensor (waste toner contact) (1)
• Separator pad (1)
• Separator roller (1)
• Separator roller assembly (1)
• Spare parts kit (2)
• Speaker (1)
• Suction filter (1)
• Support strap (1)
• SVC actuators bin full flag (1)
• Switch (media size) assembly (1)
• Toner cartridge smart chip contact (1)
• Toner density sensor (1)
• TPS wiper mechanism (1)
• Transfer roll (1)
• Transfer roller (2)
• Tray (1)
• Tray indicator cover (1)
• Tray lock lever (1)
• Upper redrive (1)
• Vertical media guide (1)